Back to previous page

DF12-RBC  RoBot Controller 

Features:

• Supports DF12-DIP and DF12-SIP modules

• Installed with Motorola serial monitor

• On-board TTL-RS232 converter

• Auto-start user application program from on-chip flash memory via a toggle switch
• Four LEDs connected to port T
• A 2-position DIP switch connected to port A
• Four servo outputs with selectable supply voltage for servos
• Four analog or digital sensor inputs
• Four push button switches connected to port A
• On-board speaker for music applications
• On-board potentiometer trimmer pot for ADC input

• 20x2 male header provides all I/O ports to user target board using a ribbon cable

• 30x1 female header for quick prototyping using a solderless breadboard

• Large Turret terminal for ground test point on each module

• Green LED power indicator

• High Quality RUN/LOAD toggle switch

• RS-232 Serial Port w/ DB9 Connector

• CAN 2.0 interface headers

• 5x2 male header for interfacing a line follow module

• 5x2 male header for a SPI port

• Footprints for RF transceiver and real-time clock

• Small prototype area

• Optional 8x2 LCD module with backlight

• Package also includes useful software:
• Fully debugged sample programs including source code
• Test program that simultaneously plays a song, makes a LED chaser from PT0-PT3 LEDs, changes LED brightness by adjusting the trimmer pot
• Eric Engler's Windows AsmIDE software with the Motorola free assembler
• Small PCB size of 3.3" X 4"

The available option now are a 8x2 LCD display module with backlight, an RS232 cable and an AC adapter.
The available option  in the near future will be a low cost RF transceiver and DS1302 Real Time Clock.