| |
Firebird32-UTB (
USB to TTL Breakout )
A versatile FT232RL based USB to TTL breakout board
for the Firebird32 products.
Besides the 5x2 male
header for connecting to a Firebird32 board, user
can also solder in a 6x1 male or female header for connecting to
an Arduino
board. Use these BLK
and GRN pins to align the UTB with your
Arduino board.
Because new PCs
offer USB ports only, this type of breakout board
is an almost must-have accessory if you work with
microcontroller applications regardless of which
microcontroller you prefer. If you don't have
it now, sooner or later you will need one.
Features:
-
Low cost, MSRP: $13.90, introductory price: $11.90 ( introductory price )
- On-board jumper to power a target board
When the jumper is on the J3, the UTB provides 5V or 3.3V to a
target board.
Remove the jumper from the J3, the UTB disconnects 5V or 3.3V to
a target board.
- On-board jumper to select 5V or 3.3V for target boards.
When the jumper is on the upper 2-pins of the J4, the board operates
at 5V, 500mA
When the jumper is on the lower 2-pins of the J4, the board
operates at 3.3V, 100mA
- 5V or 3.3V voltage level LED indicators, red indicates
5V and yellow indicates 3.3V
A Wytec's exclusive design feature and has been implemented on
our Roadrunner12 since 2009.
- TX and RX LEDs for monitoring
FT2323RL
transmission status.
- DTR pin to auto-reset Arduino
boards
- PC board size:
1.46" X 0.85"
Warning: All male headers are not included.
|
