EVBplus Shopping - Accessories

 

 

 

EVBplus.com

Students

Non-Students

Accessories

Components

Contact Us 

 

 

    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

        
Part #:  USB232
USB to RS232 adapter		 $14.00

Part #:  MOTORS
A small stepper motor (9V-12V) and a small DC motor (9V-12V)		 $7.00

       
Part #:  AC091A
AC Adapter, 9VDC, 1A output, 100V-240V AC input
2.1mm barrel DC plug, center positive.
This is a high efficiency switching power supply adapter and the output is regulated to 9V 		$5.00  


 
Part #:  SDVGA
SD Memory card connector and VGA camera interface.  It can only be purchased with the Drgon12-Plus since this is a factory installed item
 		 $20.00  

 
       
Part #:  TinyBee-1
KXPS5-3157 3g Tri-Axis XYZ Accelerometer in a 14 pin DIP module with 0.025" square pins
 		 $18.00  
Part #:  TinyBee-2
KXPS5-3157 3g Tri-Axis XYZ Accelerometer in a 14 pin DIP module with flat IC type leads and an on-module 3.3V regulator
 		 $19.00  

 
Part #:  TinyBee-3
KXPS5-3157 3g Tri-Axis XYZ Accelerometer module with cable and connector. It works with the Dragon12P and MiniDragon+, MiniDragonP2 and BBU boards
 		 $19.00  

       
Part #:  WytecUSB
FT232RL based flawless USB to RS232 or TTL adapter including a 6" USB cable
 		 $16.00  
Part #:  TinyUSB
The FT232RL USB to TTL interface chip in a standard low cost  .3" wide 16-pin DIP socket
 		 $7.00  

 
Part #:  RoadRunnerJr
A flawless USB to TTL interface kit for soldeless breadboard. It's un-assembled
 		 $10.00  

 
Part #:  UTA
A flawless USB to TTL adapter including a 6" USB cable for new Wytec boards with USB interface
 		 $14.00  

 

Part #:  RTA
A RS232 to TTL adapter including a 4x2 ribbon cable for new Wytec boards with USB interface
It does not include RS232 DB9 cable (DB9CBL6, $3)
 		 $9.00


Part #:  LCD8X2
8x2 LCD Module with LED backlight for the Spider12 and the DragonflyBot Board. It does not fit other boards.
 		 $10.00  
Part #:  LCD16X2-Blue
16x2 LCD module, blue background with white LED backlight.  Includes male and female 16x1 connectors.
 		 $10.00  

 
Part #:  LCD16X2-MDP2
16x2 LCD Module for the MiniDragon+ and MiniDragon-Plus2 board, low power, no backlight.  Includes a 7x2 ribbon cable assembly.
 		 $10.00  

 
Part #:  KPAD4x4
A 4x4 membrane keypad for FOX11 and EVBplus2 boards		 $9.00

 
       
Part #:  DB9CBL6
Standard DB9 RS232 serial cable, male to female, 6 feet		 $3.00  

 
Part #:  BDMCBL
10" BDM ribbon cable, 6-pin IDC connectors		 $2.00  
 

Part #:  USD-1
One US dollar payment

 

 $1.00
 

 
Part #:  PNA4602M
38KHz IR detector for remote stop and go control on DragonflyBot Board 		 $1.00  

 
Part #:  MiniIO
Small I/O expansion board with a solderless breadboard for MiniDragon+ board only, it does not work with other boards		 $19.00  

 
Part #:  DF12P-DOCK
DragonFly12 Docking Board for DF12P DIP module. This low price is for the board only and it does not include AC adapter and RS232 cable. 		$19.00  

 

Wytec Company